|
Scotch 4218-BA-40 Electrical Tape, 66 ft L, 3/4 in W, Vinyl Backing, Black
Scotch(R) commercial-grade vinyl electrical tape 700 is a high-quality, vinyl insulating tape. it has excellent resistance to abrasion, moisture, alkalies, acids, copper corrosion and varying weather conditions. Scotch(R) tape 700 provides excellent mechanical protection with minimum bulk.
Product Details
Backing Material:Vinyl
Color:Black
Length:66 in
Temperature Rating:-18 to 105 deg C
Thickness:0.007 in
Width:3/4 in
Features
Primary electrical insulation for all wire and cable splices rated up to 600 V and 80 deg C
Protective jacketing for high voltage cable splices and repairs
Harnessing of wires and cables
For above or below ground applications
View Details
|
0094474 |
Scotch 4218-BA-40 Electrical Tape, 66 ft L, 3/4 in W, Vinyl Backing, Black |
0 |
2.79 |
/ EA |
4218-BA-40 |
|
|
Gardner Bender Xtreme GBX-TK Terminal Kit, 600 V, 22 to 10 AWG Wire, Blue/Red/Yellow
Heat shrink butt splice kit, 22-10 AWG. For harsh environments. Insulates and protects connections from wire pullout, moisture intrusion and abrasion. Constructed with heat shrink insulation, adhesive lined. Heat-activated adhesive melts and flows to waterproof and create a seal when crimped and heated. Resists salt water, oil, gasoline and other environmental contaminants. Compartmentalized case included.
Product Details
Color:Blue/Red/Yellow
Type:Insulated
Voltage Rating:600 V
Wire Size:22 to 10 AWG
Features
Crimp easily without splitting to secure the connection in place
Heat shrinking forms a final watertight seal and the ultimate vibration and strain relief
Strong connections reduce wire pull out and keep you powered even when faced with heavy vibration
22 to 10 AWG assorted butt splices
View Details
|
0177378 |
Gardner Bender Xtreme GBX-TK Terminal Kit, 600 V, 22 to 10 AWG Wire, Blue/Red/Yellow |
1 |
18.99 |
/ PK |
GBX-TK |
|
|
Gardner Bender PCS-1600T Masonry Staple, 1/4 in W Crown, Polyethylene
The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces.
Product Details
Color:Black
Crown Width:1/4 in
Material:Polyethylene
Type:Clip-On Coaxial
Features
Hardened nail penetrates cement block, plaster and mortar
Zinc-plated nail resists corrosion
Not for brink or poured concrete
View Details
|
0958926 |
Gardner Bender PCS-1600T Masonry Staple, 1/4 in W Crown, Polyethylene |
3 |
3.29 |
/ PK |
PCS-1600T |
|
|
Gardner Bender 46-104 Cable Tie, 6/6 Nylon, Natural, 4 in L, 100/PK
Gardner(R) Bender Cable ties are designed for strength, durability and reliability. Ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen, you name it and these ties will bundle it. Designed with simple enhancements that make them easy to use including a slightly bent tip to ensure easy insertion into the tie head and close serrations along it's length to promote precise adjustment when tightening.
Product Details
Color:Natural
Length:4 in
Material:6/6 Nylon
Tensile Strength:18 lb
Type:Miniature
Width:0.095 in
Features
Bent tip ensures easy insertion into the tie head
Easy slip during pull-thru due to smooth radiused edges
Finger grips on end provides secure grip to tighten
View Details
|
0975722 |
Gardner Bender 46-104 Cable Tie, 6/6 Nylon, Natural, 4 in L, 100/PK |
0 |
4.99 |
/ PK |
46-104 |
|
|
King Innovation Dryconn Series 62210 Wire Connector, Aqua/Red, 22 to 8 AWG Wire, Copper Contact, 5/P
Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL 486D listed.
Product Details
Color:Aqua/Red
Contact Material:Copper
Height:3.82 in
Length:1.3 in
Voltage Rating:600/1000 V
Width:0.51 in
Wire Size:22 to 8 AWG
Features
One-Step(R) installation
Corrosion-resistant
View Details
|
0984336 |
King Innovation Dryconn Series 62210 Wire Connector, Aqua/Red, 22 to 8 AWG Wire, Copper Contact, 5/P |
0 |
4.99 |
/ EA |
62210 |
|
|
IPG 85832 Electrical Tape, 60 ft L, 3/4 in W, PVC Backing, Red
For use up to 600 V. PVC film coated with a non-corrosive rubber-based adhesive. Resistant to water, oils, acids, alkalis and other corrosive chemicals. Lead-free. Temperature range from 32 to 176 deg F. Used to repair frayed wiring, splice wiring, protect wire nut connections, resurface and insulate hand tools and general-purpose maintenance and repair. 7 mil thick. UL listed and CSA Certified.
Product Details
Backing Material:PVC
Color:Red
Length:60 in
Temperature Rating:176 deg F
Voltage Rating:600 V
Width:3/4 in
View Details
|
1008333 |
IPG 85832 Electrical Tape, 60 ft L, 3/4 in W, PVC Backing, Red |
10 |
2.59 |
/ EA |
85832 |
|
|
King Innovation 70112 Safety Staple, 9/16 in W Crown, 1-1/4 in L Leg, Carbon Steel/PVC
Made of 12 ga carbon steel, insulated with high-impact, hot-melt PVC bonded to the top of the staple, tumble deburred and with rust inhibitor applied. Reduces risk of electrical fire and prevents a short circuit if the insulation is cut. Color coded for size and application and highly visible. Used with BX or 3 conductor, #14, #12 and #10 WG or 2 stacked oval #14 and #12 WG. Rated for up to 2500 V. Dielectric rating per ETL Test 525777.
Product Details
Color:Blue
Crown Width:9/16 in
Leg Length:1-1/4 in
Material:Carbon Steel/PVC
Suitable for:BX 3 Conductor 14 12 10 AWG or 2 Stacked Oval 14 12 AWG Cables Type:Insulated
Features
Reduces risk of electrical fires
Insulated with bonded PVC
Color coded for size and application
Dielectric rating per ETL test 525777
Tumble deburred, a rust inhibitor applied
View Details
|
1472208 |
King Innovation 70112 Safety Staple, 9/16 in W Crown, 1-1/4 in L Leg, Carbon Steel/PVC |
2 |
4.99 |
/ BX |
70112 |
|
|
Gardner Bender WingGard 86 16-086 Wire Connector, 22 to 6 AWG Wire, Steel Contact, Red, 125/JAR
GB's WingGard(TM) twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
Product Details
Color:Red
Contact Coating:Zinc
Contact Material:Steel
Height:6.13 in
Housing Material:Thermoplastic
Length:1-1/4 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:29/32 in
Wire Size:22 to 6 AWG
Features
Wings are knurled for a sure grip and offset from centerline for greater twisting leverage
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
1746072 |
Gardner Bender WingGard 86 16-086 Wire Connector, 22 to 6 AWG Wire, Steel Contact, Red, 125/JAR |
2 |
21.99 |
/ PK |
16-086 |
|
|
Gardner Bender HST-101 Heat Shrink Tubing, 1/4 in Pre-Shrink, 1/8 in Post-Shrink Dia, 8 ft L, PVC, B
Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 deg C the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 secs.
Product Details
Color:Blue
Diameter:1/4 in Pre-Shrink 1/8 in Post-Shrink
Includes:(1) Roll Heat Shrink
Length:8 in
Material:PVC
Operating Temperature:-55 to 135 deg C
Features
Provides excellent protection from mechanical abrasion and moisture Flame-retardant polyolefin construction resists common fluids and solvents Repairs, strengthens and protects cable insulation to ensure strong connections
Ideal for general-purpose uses including adding perspiration-resistant grip to tool and sporting handles or sealing rope ends
Excellent product to repair appliance, extension or small electronic cords that are exposing bare wire
600 V/mil dielectric strength
2:1 shrink ratio means tubing shrinks to 1/2 it's ID size
Self-extinguishing tubing will not drip, crack or flow when heated to shrink temperatures
View Details
|
1906221 |
Gardner Bender HST-101 Heat Shrink Tubing, 1/4 in Pre-Shrink, 1/8 in Post-Shrink Dia, 8 ft L, PVC, B |
2 |
11.99 |
/ EA |
HST-101 |
|
|
Calterm 05102 Terminal Kit, 10 AWG Wire, Black
Keep your stock full and electrical needs met with a wire terminal kit from Calterm. Boxed assortment of terminals and wire connectors for a wide variety of connection repairs and installations. You'll find various terminals for various circuit protection devices, all insulated to last for those any environments. Calterm terminals are leading the industry in quality and durability. Find just the right terminal selection you need for your shop with a high-quality wire connector kit.
Product Details
Color:Black
Includes:66217 Long Nose Crimper Assortment of Vinyl Butt Splices Spade Terminals Disconnects and Ring Terminals
Wire Size:10 AWG
Features
Finely stranded for flexibility
Prepackaged in small coils and 100 ft spools
View Details
|
2152072 |
Calterm 05102 Terminal Kit, 10 AWG Wire, Black |
2 |
19.99 |
/ EA |
05102 |
|
|
Gardner Bender PPC-1538UVB Cable Clamp, 3/8 in Max Bundle Dia, Plastic, Black
Gardner Bender plastic clamps are tough, durable, yet extremely lightweight and feature clean, smooth edges to minimize damage to cables. Our contractor-friendly design facilitates quick installations saving time and money. Clamps securely hold harnesses, cables and tubing up to 3/8 in (10 mm) Dia.
Product Details
Color:Black
Height:6.0 in
Material:Plastic
Maximum Bundle Diameter:3/8 in
Width:3/8 in
Features
Lightweight plastic construction provides resistance to high and low temperature extremes
Clean, smooth edges for easy handling and to help prevent cable damage Durable, crack-resistant plastic withstands tough conditions at the jobsite Use to hold harnesses, cables and tubing (not included) in construction, maintenance and assembly-line operations
Mounting holes provided for easy installation with a screw or nail
Tough, durable, yet extremely lightweight
View Details
|
2583466 |
Gardner Bender PPC-1538UVB Cable Clamp, 3/8 in Max Bundle Dia, Plastic, Black |
4 |
2.79 |
/ PK |
PPC-1538UVB |
|
|
Duck 442055 Electrical Tape, 10 ft L, 1 in W, Black
Duck Wrap-Fix can hold up to all types of weather conditions, making it ideal for fixes that need long-lasting hold and protection. This multi-use DIY tape is the perfect tool to have on hand for quick repairs around the home or jobsite. Just wrap around pipes, insulation, hoses or tools - the tape is designed to create a watertight seal around your repair without the need of additional adhesives or tools.
Product Details
Color:Black
Length:10 in
Thickness:20 mil
Width:1 in
Features
Self-bonding, non-adhesive silicone tape
Does not leave behind damage or residue
Stretches up to 300%
UV, chemical-and water-resistant for uses ranging from 65 to 500 deg F
View Details
|
2668945 |
Duck 442055 Electrical Tape, 10 ft L, 1 in W, Black |
2 |
9.99 |
/ EA |
442055 |
|
|
Gardner Bender PushGard 10-PC3 Wire Connector, 12 to 22 AWG Wire, Copper Contact, Orange, 100/JAR
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 V maximum in building wire and at 1000 V maximum in lighting fixtures and luminaries. Copper-to-copper connections only.
Product Details
Color:Orange
Contact Material:Copper
Height:15.0 in
Housing Material:Polycarbonate
Length:0.78 in
Voltage Rating:600 V
Width:0.53 in
Wire Size:12 to 22 AWG
Features
Easy and fast to use, just strip and push conductors into PushGard connectors to make reliable, secure connections
Simplified insertion and compact size helps in tight locations
Clear polycarbonate housing has color-coded side panels for connection verification and identification
Copper to copper connections only
Continuity test point for easy voltage checks
With corrosion-resistant stainless steel springs, PushGard connectors restrict wire pullout, yet corrections are possible with a simple left-right twist and pull
View Details
|
2789378 |
Gardner Bender PushGard 10-PC3 Wire Connector, 12 to 22 AWG Wire, Copper Contact, Orange, 100/JAR |
2 |
15.99 |
/ BX |
10-PC3 |
|
|
Calterm 73458 Heat Shrink Tubing, 3/8 in Dia, 6 ft L, PVC, Red
When wires become entangled they are safety hazards, for both the equipment and the owner. Calterm offers a variety of products for protections and neatness. As the needs of professional electricians change in managing wire and cable, Calterm continues to deliver innovative solutions.
Product Details
Color:Red
Diameter:3/8 in
Length:6 in
Material:PVC
Operating Temperature:221 deg F
Features
Corrugated for added flexibility
Split down the center for wire breakout when needed
Flex tubing protects hoses, wire and cables from cuts, abrasions and UV wear
View Details
|
2805281 |
Calterm 73458 Heat Shrink Tubing, 3/8 in Dia, 6 ft L, PVC, Red |
2 |
4.59 |
/ BG |
73458 |
|
|
Gardner Bender GTF-300 Friction Tape, 30 ft L, 3/4 in W, Black
Black friction tape with a matted finish that provides the best gripping surface available. Use over electrical splices, wrapping grips or sporting goods.
Product Details
Color:Black
Length:30 in
Width:3/4 in
View Details
|
3249646 |
Gardner Bender GTF-300 Friction Tape, 30 ft L, 3/4 in W, Black |
2 |
3.49 |
/ RL |
GTF-300N |
|
